2008 Infiniti EX35 Owner's Manual - Page 398

HEADLIGHTS Replacing Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact an INFINITI dealer. Xenon headlight bulb (if so equipped) : CAUTION Use the same number and wattage as originally installed: Low beams (Xenon) Wattage: 35 Bulb no.: D2S If replacement is required, see an INFINITI dealer. Halogen headlight bulb (if so equipped) : The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. If replacement is required, see an INFINITI dealer for servicing. ● Use the same number and wattage as originally installed: Low beam (Halogen): Wattage: 55 Bulb no.: H11 High beam (Halogen): Wattage: 65 Bulb no.: H9 ● Do not leave the bulb out of the headlight reflector for a long period of time as dust, moisture, and smoke may enter the headlight body and affect the performance of the headlight. ● Aiming is not necessary after replacing the bulb. When aiming adjustment is necessary, contact an INFINITI dealer. WARNING HIGH VOLTAGE When xenon headlights are on, they produce a high voltage. To prevent an electric shock, never attempt to modify or disassemble. Always have your xenon headlights replaced at an INFINITI dealer. For additional information, see "HEADLIGHT AND TURN SIGNAL SWITCH" in the "2. Instruments and controls" section. CAUTION ● High pressure halogen gas is sealed inside the bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. ● Only touch the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect bulb life and/or headlight performance. 8-24 Maintenance and do-it-yourself