2009 Infiniti EX35 Owner's Manual - Page 111

VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH DISTANCE CONTROL ASSIST (DCA) SWITCH (if so equipped) CLOCK SIC1881 SIC3833 SIC3325 The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driving conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off. To turn off the VDC system, push the VDC OFF switch. The indicator will illuminate. Push the VDC OFF switch again or restart the engine to turn on the system. (See "VEHICLE DYNAMIC CONTROL (VDC) SYSTEM" in the "5. Starting and driving" section.) The Distance Control Assist (DCA) system brakes and moves the accelerator pedal upward according to the distance and the relative speed to the vehicle ahead to help assist the driver to maintain a following distance. To turn on the DCA system, push the DCA switch. The DCA system switch indicator light illuminates on the dot matrix liquid crystal display while the DCA system is on. To turn off the DCA system, push the DCA switch. The DCA system switch indicator light will turn off. See "DISTANCE CONTROL ASSIST (DCA) SYSTEM" in the "5. Starting and driving" section for more details. If the power supply is disconnected, the clock will not indicate the correct time. Readjust the time. ADJUSTING THE TIME 1. To set the clock forward, push the button 1 . 2. To set the clock backward, push the button 2 . 3. To move forward or backward faster, push and hold the button more than 5 seconds. For details about display clock adjustment (if so equipped), see "HOW TO USE SETTING BUTTON" in the "4. Monitor, climate, audio, phone and voice recognition systems" section. Instruments and controls 2-43