2009 Infiniti EX35 Owner's Manual - Page 194

Default to Front-Side View: With this item turned to ON, the front-side view is initially displayed instead of the bird-eye view when the Around View Monitor is displayed. Corner Sonar Sensitivity: Adjust the sensitivity level of the corner sonar sensor higher (right) or lower (left). Blind-Area Reminder: With this item turned to ON, the non-viewable area is highlighted in yellow for 7 seconds after the bird-eye view is displayed. SAA1844 ● When the temperature is extremely high or low, the screen may not display objects clearly. This is not a malfunction. ● When strong light directly shines on the camera, objects may not be displayed clearly. This is not a malfunction. ● The screen may flicker under fluorescent light. This is not a malfunction. ● The colors of objects on the Around View Monitor may differ somewhat from those of the actual object. ● Objects on the monitor may not be clear and the color of the object may differ in a dark location or at night. This is not a malfunction. ● There may be differences in clearness between each camera view of the bird-eye view. ● If dirt, rain or snow attaches to the camera, the Around View Monitor may not display objects clearly. Clean the camera. ● Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth that has been dampened with a diluted mild cleaning agent and then wipe with a dry cloth. Sonar Display: When this item is turned to ON, the corner sonar indicator is displayed in the front-side view. AROUND VIEW MONITOR SETTINGS To set up the Around View Monitor to your preferred settings, push the SETTING button, select "Others" using the INFINITI controller and push the ENTER button. Then select the "Camera" key and push the ENTER button. Predictive Course Line: When this item is turned to ON, the predictive course line is displayed in the front and the rear view. OPERATING TIPS ● The screen displayed on the Around View Monitor will automatically return to the previous screen 3 minutes after the CAMERA button has been pushed while the shift lever is in a position other than the R (Reverse) position. ● The display of images on the screen may be delayed after screens are switched. Objects in the Around View Monitor may be distorted momentarily until the Around View Monitor screen is displayed completely. 4-36 Monitor, climate, audio, phone and voice recognition systems