2009 Infiniti EX35 Owner's Manual - Page 138

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver's or front passenger's) A or the lift gate request switch B within the range of operation. When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see "Setting hazard indicator and horn mode" later in this section. *2: Doors will not lock with the Intelligent Key while any door is open. *3: Doors will not lock by pushing the door handle request switch with the Intelligent Key inside the vehicle. However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key. Unlocking doors and fuel-filler door 1. Push the door handle request switch (driver's or front passenger's) A or the lift gate request switch B once while carrying the Intelligent Key with you. 2. The hazard indicator flashes once and outside chime sounds once. The corresponding door and the fuel-filler door or the lift gate will unlock. 3. Push the door handle request switch again within 60 seconds. 4. The hazard indicator flashes once and outside chime sounds once again. All the doors will unlock. All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch while the doors are locked. If during this Locking doors and fuel-filler door SPA2467 1. Move the selector lever to the P (Park) position, push the ignition switch to the OFF position and make sure you carry the Intelligent Key with you.*1 2. Close all the doors.*2 3. Push the door handle request switch (driver's or front passenger's) A or the lift gate request switch B while carrying the Intelligent Key with you.*3 4. All the doors and fuel-filler door will lock. 5. The hazard indicator flashes twice and the outside chime sounds twice. *1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position. SPA2410 3-10 Pre-driving checks and adjustments