2013 Jeep Patriot Owner's Manual - Page 216

214 UNDERSTANDING YOUR INSTRUMENT PANEL vehicle is driven more than 1 mile (1.6 km) with either If the ABS light remains on or turns on while driving, it turn signal on, a continuous chime will sound to alert indicates that the Anti-Lock portion of the brake system is not functioning and that service is required. However, you to turn the signals off. the conventional brake system will continue to operate NOTE: If either indicator flashes at a rapid rate, check normally if the BRAKE warning light is not on. for a defective outside light bulb. If the ABS light is on, the brake system should be serviced 9. High Beam Indicator as soon as possible to restore the benefits of Anti-Lock This indicator shows that the high beam head- brakes. If the ABS light does not turn on when the lights are on. Push the multifunction lever for- ignition switch is turned to the ON/RUN position, have ward to switch the headlights to high beam, and pull the light inspected by an authorized dealer. toward yourself (normal position) to return to low beam. 11. Seat Belt Reminder Light 10. Anti-Lock Brake (ABS) Light - If Equipped When the ignition switch is first turned to ON/ This light monitors the Anti-Lock Brake System RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if (ABS). The light will turn on when the ignition switch is turned to the ON/RUN position and the driver's seat belt is unbuckled, a chime will sound. may stay on for as long as four seconds. After the bulb check or when driving, if the driver or front passenger's seat belt remains unbuckled, the Seat Belt Reminder Light will illuminate and the chime