2013 Jeep Patriot Owner's Manual - Page 455

MAINTAINING YOUR VEHICLE 453 MOPAR௡ Spray White Lube to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades. Always use washer fluid when using the wipers to remove salt or dirt from a dry windshield. Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with petroleum products such as engine oil, gasoline, etc. NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor perforThe external lock cylinders should be lubricated twice a mance of blades may be present with chattering, marks, year, preferably in the Fall and Spring. Apply a small water lines or wet spots. If any of these conditions are amount of a high quality lubricant, such as MOPAR௡ present, clean the wiper blades or replace as necessary. Lock Cylinder Lubricant directly into the lock cylinder. Adding Washer Fluid Windshield Wiper Blades The washer fluid reservoir is located in the engine Clean the rubber edges of the wiper blades and the compartment, and the fluid level should be checked at windshield periodically with a sponge or soft cloth and a regular intervals. Fill the reservoir with windshield mild nonabrasive cleaner. This will remove accumulawasher solvent only (not radiator antifreeze). tions of salt or road film. 7