2013 Jeep Patriot Owner's Manual - Page 25

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 3. Test the feature while outside of the vehicle by pressing • For vehicles equipped with the EVIC, refer to "Electronic the LOCK button on the RKE transmitter with the Vehicle Information Center (EVIC)/Personal Settings ignition switch in the LOCK position and the key (Customer-Programmable Features)" in "Understanding removed. Your Instrument Panel" for further information. 4. Repeat these steps if you want to return this feature to • For vehicles not equipped with the EVIC, perform the its previous setting. following steps: NOTE: Pressing the LOCK button on the RKE transmitter 1. Press and hold the UNLOCK button on a programmed while you are in the vehicle will activate the Vehicle RKE transmitter for at least 4 seconds, but no longer Security Alarm. Opening a door with the Vehicle Security than 10 seconds. Then, press and hold the LOCK Alarm activated will cause the alarm to sound. Press the button while still holding the UNLOCK button. UNLOCK button to deactivate the Vehicle Security Alarm. 2. Release both buttons at the same time. Flash Lights With Remote Key Lock/Unlock 3. Test the feature while outside of the vehicle by pressThis feature will cause the turn signal lights to flash when ing the LOCK/UNLOCK buttons on the RKE transthe doors are locked or unlocked with the RKE transmitmitter with the ignition switch in the LOCK position ter. This feature can be turned on or turned off. To change and the key removed. the current setting, proceed as follows: 2