2013 Jeep Patriot Owner's Manual - Page 433

WHAT TO DO IN EMERGENCIES 431 Once the engine is started, remove the jumper cables in the reverse sequence: 6. Disconnect the negative (-) jumper cable from the engine ground of the vehicle with the discharged battery. 7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery. CAUTION! Accessories that can be plugged into the vehicle power outlets draw power from the vehicle's battery, even when not in use (i.e., cellular phones, etc.). Eventually, if plugged in long enough, the vehicle's battery will discharge sufficiently to degrade battery life and/or prevent the engine from starting. 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery. FREEING A STUCK VEHICLE If your vehicle becomes stuck in mud, sand or snow, it 9. Disconnect the positive (+) end of the jumper cable can often be moved using a rocking motion. Turn the from the positive (+) post of the discharged vehicle. steering wheel right and left to clear the area around 10. Reinstall the air intake duct. the front wheels. Then shift back and forth between If frequent jump-starting is required to start your vehicle DRIVE and REVERSE (with automatic transmission) or you should have the battery and charging system in- 2nd gear and REVERSE (with manual transmission), while gently pressing the accelerator. Use the least spected at your authorized dealer. amount of accelerator pedal pressure that will maintain 6