2015 Kawasaki Brute Force 300 Owners Manual - Page 119
2015 Kawasaki Brute Force 300 Manual
Page 119 highlights
118 MAINTENANCE AND ADJUSTMENT the oil has completely drained out, install the • After drain bolt and gasket. Replace the gasket with a new one. Tightening Torque Rear Final Gear 20 N·m (2.0 kgf·m, 15 ft·lb) Case Drain Bolt ○Do not add any chemical additive to the oil. NOTE Oils fulfilling the above requirements are fully formulated and provide adequate lubrication for the rear final gear case. • Install the filler bolt. j WARNING HAZARD Getting gear case oil on tires. WHAT CAN HAPPEN Can make them slippery which can cause an accident and injury. HOW TO AVOID THE HAZARD Clean up any spilled oil immediately using soap and water. the gear case up to the bottom thread of the oil • Fill level check hole with a good quality oil specified in the table. Rear Final Gear Case Oil Oil Capacity 0.15 L (0.16 US qt) Oil Viscosity SAE#80 Tightening Torque Rear Final Gear Case Filler Bolt 15 N·m (1.5 kgf·m, 11 ft·lb) the rear guard as and tighten the fitting bolts • Install to the specified torque. Tightening Torque Fitting Bolts 31 N·m (3.2 kgf·m, 23 ft·lb)