2015 Kawasaki Brute Force 300 Owners Manual - Page 137
2015 Kawasaki Brute Force 300 Manual
Page 137 highlights
136 MAINTENANCE AND ADJUSTMENT the rod clockwise or counterclockwise until • Turn the drive select lever into the "N" position of the • shift guide and tighten the locknuts, then pull out the standard tip/phillips screwdriver. After adjustment, start the engine and test ride the ATV to be sure the drive select lever is operating properly. Belt Drive Transmission (CVT) The vehicle is equipped with a belt-driven Continuously Variable Transmission (CVT). This automatic drive system, although simple to operate, does require periodic inspection since the drive belt wears with normal use. Inspection should be done by an authorized Kawasaki dealer. Neglect, abuse, or failure to maintain the transmission can result in belt damage and failure. Inspection of the transmission drive belt is required at least every 2 000 km (1 200 mi.) or year of use whichever comes first, since drive belts wear with normal use. More frequent inspection is necessary if the vehicle is subjected to hard usage. If excessive belt slippage occurs, do not ride the vehicle until damaged components are repaired. j Periodic Drive Belt Inspection Requirements A. Locknuts B. Rod C. Standard Tip/Phillips Screwdriver • Turn the ignition switch is to OFF and make sure the engine stop switch in the ON " " position.