2006 Mazda Tribute Owner's Manual - Page 42

JOBNAME: No Job Name PAGE: 42 SESS: 1 OUTPUT: Wed Jun 15 16:24:35 2005 /ford_pdm/ford/own2002/j14/mpdiff Lights 6. Without turning, carefully pull bulb out of headlamp assembly. Note: The bulb's metal base gets very hot during headlamp operation. Be sure the bulb base is cool before handling. If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used. 7. Insert the glass end of the new bulb into the headlamp assembly. When the bulb's three metal tabs are aligned with the grooves in the plastic base, push the bulb into the lamp assembly until the bulb's metal base contacts the plastic base. 8. Rotate the retainer spring over the bulb's metal base and secure it on the bulb hooks. 9. Install rubber boot on the lamp assembly. Be sure to press firmly around the perimeter of the boot and around the bulb to ensure the proper seal of the bulb. 10. Connect the electrical connector into the rear of the bulb until it "snaps." art=j14cf312_a Replacing front parking lamp/turn signal bulbs For bulb replacement, see your authorized dealer. Replacing side repeater bulbs 1. Turn the headlamp switch to off. 2. Carefully pry the lamp assembly away from the fender. 3. Rotate the bulb socket counterclockwise to remove it from the lamp assembly. 4. Pull the bulb straight out. Reverse steps to reinstall bulb(s). art=mntmc305_d Replacing foglamp bulbs For bulb replacement, see your authorized dealer. 42 PAGE: 42 OP: root EDIT SESSION: 1 DATE: JUNE 15 2005 at 16:24 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_j14/DIV_mpdiff DIFF-MARKED Review Copy -- (OLD=2006 Tribute fus Owners Guide (post-2002-fmt) 06.5 Tribute Champ (#26074) (May-02-2005 14:29:19)) (NEW=2006 Tribute fus Owners Guide (post-2002-fmt) 2006.5 Tribute CNE Review (#26074) (Jun-15-2005 16:18:13)) 2006 Tribute (j14), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)