2006 Mercedes CL-Class Owner's Manual - Page 200

Controls in detail Power windows Fully closing the power windows (Express-close) Press switch 1 to 2 at the symbol j past the resistance point and release. The corresponding window closes completely. Warning! ! If the upward movement of the door window is blocked during the closing procedure, the door window will stop and open slightly. Remove the obstruction, press the respective door window switch at the symbol j again past the resistance point and release. If the door window still does not close when there is no obstruction, press and hold the respective door window switch at the symbol j. The door window will then close without the obstruction sensor function. Stopping power windows during Express-operation Briefly press the respective window switch again. Synchronizing the power windows The windows must be synchronized each time after the battery has been disconnected if the windows cannot be fully opened (Express-open) or closed (Express-close) Each window must be synchronized. Close all doors. Switch on the ignition ( page 34). Press and hold switches 1 to 4 at the symbol j until the windows are completely closed. Hold on to switches 1 to 4 for approximately 1 second. The windows are synchronized. G Driver's door only: If within 5 seconds you again press the switch past the resistance point and release, the automatic reversal will not function. 199