2006 Mercedes CL-Class Owner's Manual - Page 383
2006 Mercedes CL-Class Manual
Page 383 highlights
Practical hints Replacing bulbs High beam flasher bulb Press ends of housing cover 1 tab together and remove cover. Press connector 2 downward. Remove connector 2 with the bulb. Insert the new bulb so that the base locates in the recess on the holder. From below, press connector 2 with bulb upward onto the reflector. Align housing cover 1 and click into place. Front turn signal bulb Turn bulb socket 4 counterclockwise and pull out. Gently push bulb into bulb socket 4, turn counterclockwise and remove. Insert new bulb in bulb socket 4, push in and twist clockwise. Reinsert bulb socket 4 in lamp and twist clockwise. Parking and standing lamp bulb Press ends of housing cover 1 tab together and remove cover. Pull out the bulb socket 3 with the bulb. Pull the bulb out of the bulb socket 3. Insert a new bulb in the socket 3. Reinstall the bulb socket 3. Align housing cover 1 and click into place. Front side marker lamp bulbs Since replacing the side marker lamp bulbs is a technically highly demanding process, we recommend you have the side marker lamp bulbs replaced by an authorized Mercedes-Benz Center. Replacing bulbs for rear lamps Before you start to replace a bulb for a front lamp, do the following first: Turn the exterior lamp switch to M ( page 52). Open the trunk ( page 101). 382
![](/manual_guide/autos/2006-mercedes-clclass-owners-manual-d1e05ba/383.png)