2006 Mercedes CL-Class Owner's Manual - Page 263

Operation Driving instructions Driving off Apply the brakes to test them briefly after driving off. Perform this procedure only when the road is clear of other traffic. Warm up the engine smoothly. Do not place full load on the engine until the operating temperature has been reached. When starting off on a slippery surface, do not allow a drive wheel to spin for an extended period with the ESP® switched off. Doing so may cause serious damage to the drivetrain which is not covered by the Mercedes-Benz Limited Warranty. Parking Warning! G Turn the SmartKey to starter switch position 0 and remove, or press KEYLESS-GO* start/stop button ( page 35). Take the SmartKey or the SmartKey with KEYLESS-GO* with you and lock vehicle when leaving. Do not park this vehicle in areas where combustible materials such as grass, hay or leaves can come into contact with the hot exhaust system, as these materials could be ignited and cause a vehicle fire. To reduce the risk of personal injury as a result of inadvertent vehicle movement, before turning off the engine and leaving the vehicle always: Keep right foot on brake pedal. ! Set the parking brake whenever parking or leaving the vehicle. In addition, move the gear selector lever to position P. When parking on hills, always turn front wheels towards the road curb. ! Simultaneously depressing the accelerator pedal and applying the brake reduces engine performance and causes premature brake and drivetrain wear. Firmly depress parking brake pedal. Move the gear selector lever to position P. Slowly release brake pedal. When parked on an incline, turn front wheel towards the road curb. 262