2006 Mercedes CL-Class Owner's Manual - Page 389

Practical hints Flat tire Take the two-piece wheel wrench out of the vehicle tool kit tray. Assemble wheel wrench. On wheel to be changed, loosen but do not yet remove the wheel bolts (approximately one full turn with wrench). The tube openings are located directly behind the front wheel housings and in front of the rear wheel housings. 1 Jack support tube cover Move cover 1 toward rear by pressing at point indicated by arrow. Remove cover 1 carefully to avoid damage to the locking tabs. 1 Jack arm 2 Jack support tube hole 3 Crank Insert jack arm 1 fully into tube hole 2 up to the stop. Warning! G Insert the jack arm fully into the jack support tube hole up to the stop. Otherwise the vehicle may fall off the jack and cause personal injury or damage to the vehicle. 388