2007 Mercedes CL-Class Owner's Manual - Page 132

Control systems COMAND telephone* Use the Bluetooth® headset (see headset operating instructions). Bluetooth® Making an outgoing call Entering a telephone number using the telephone keypad Switching screen to telephone mode: Call up main telephone menu ( page 127). Use telephone keypad to enter digits. i The use of a Bluetooth® headset requires to be activated and the headset to be authorized ( page 232). Bluetooth® If you have accepted the call using COMAND, the telephone keypad, the multifunction steering wheel or the mobile phone, the call will be conducted via the hands-free system. The volume of the call can be adjusted ( page 91). If you have accepted the call using the Bluetooth® headset, the call will be conducted via the headset. Further operating functions can be found in the "Functions during a single-call connection" section ( page 133). You can also accept a call if the COMAND display is showing a screen other than the telephone mode screen. After accepting the call, you will see the caller's data in a window. Closing window: Slide qmr or omp or press n. i If you place an outgoing call and receive a busy signal, the telephone automatically starts to redial as long as the provider and the mobile phone support this function (see mobile phone operating instructions). While the call is connecting, you can also send character strings ( page 134). Entering the telephone number using the COMAND controller Switching screen to telephone mode: Call up main telephone menu ( page 127). Entering digits: Select desired digits by rotating ymz or sliding omp and press n. Deleting individual digits: Select ) and briefly press n. Deleting an entire telephone number: Select ) and press and hold n until the telephone number is deleted. Connecting a call: Select "S". i A detailed description of how to enter digits using the telephone keypad can be found on ( page 84). Connecting a call: Press s. 131