2007 Mercedes CL-Class Owner's Manual - Page 377

Controls in detail Power windows ! If the upward movement of a door window is blocked during the closing procedure, the door window will stop and open slightly. Remove the obstruction, press the respective power window switch at the upper part again past the resistance point and release. If the door window still does not close when there is no obstruction, press and hold the respective power window switch at the upper part. The door window will then close without the obstruction sensor function. i The "Summer opening" function can only be activated via the remote control of the SmartKey or SmartKey with KEYLESS-GO*. The vehicle unlocks. Release button Œ to interrupt procedure. Convenience closing feature When you lock the vehicle, you can close the side windows and tilt/sliding sunroof simultaneously. i The seat ventilation* for the driver's seat is automatically set to the highest level if activated via summer opening feature. i The function of the SmartKey overrules the KEYLESS-GO* function. Stopping during Express-operation: Briefly press the respective power window switch again. Summer opening feature If the weather is warm, you can ventilate the vehicle before driving off by simultaneously: opening the side windows opening the tilt/sliding sunroof turning on the seat ventilation* for the driver's seat Aim transmitter eye of the SmartKey or SmartKey with KEYLESS-GO* at the driver's outside door handle. The SmartKey or SmartKey with KEYLESS-GO* must be in close proximity to the driver's door handle. Press and hold button Œ until the side windows and tilt/sliding sunroof have reached the desired position. Warning! G When closing the side windows and the tilt/sliding sunroof, make sure that there is no danger of anyone being harmed by the closing procedure. If potential danger exists, proceed as follows: Release button ‹ to stop the closing procedure. To open, press and hold button Œ. To continue the closing after making sure that there is no danger of 376