2007 Mercedes CL-Class Owner's Manual - Page 63

Safety and Security Occupant safety Fold upholstery cover 3 upward. Turn installation device 4 to a vertical position so that upholstery cover 3 does not fold down. Install child seat according to the manufacturer's instructions. A rigid connection is established between the child seat and the body of the vehicle. Blocking of rear side window operation Warning! You can block the rear side window operation (for instance when you have children riding in the rear passenger compartment). The override switch is located on the door control panel of the driver's door. G Activate the override switch when children are riding in the back seats of the vehicle. The children may otherwise injure themselves, e.g. by becoming trapped in the window opening. When leaving the vehicle, always remove the SmartKey or SmartKey with KEYLESS-GO* from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. A child's unsupervised access to a vehicle could result in an accident and/or serious personal injury. i The child seat must be firmly attached to the right and left side anchor fittings. Non-LATCH type child seats may also be used and can be installed using the vehicle's seat belt system. Install child seat according to the manufacturer's instructions. 1 Override switch 2 Indicator lamp Activating: Press switch 1. Indicator lamp 2 comes on. The rear side windows can no longer be operated using the respective switch located in the rear trim panels. i Operation of the rear side windows with the switches located in the driver's door is still possible. Deactivating: Press switch 1 again. Indicator lamp 2 goes out. The rear side windows can be operated using the respective switch located in the rear trim panels. 62