2008 Mercedes S-Class Owner's Manual - Page 171

Control systems COMAND navigation (introduction) i The list shows all symbols that are contained in the digital map across all states (USA) and/or provinces (CDN). Not all POIs in all states (USA) or in all provinces (CDN) are available, however. Certain POI symbols may not be displayed on the map, even if the symbol display is switched on. i There must be sufficient GPS reception for displays 1, 2 and 3 to be shown. Height display 1 is an approximation because the navigation system uses the GPS signals for the calculation. Switching the geo-coordinate display on or off Select "Navi" play". "Navi" "Map Dis- The map display list appears. Display options with geo-coordinate display switched on If the crosshair is displayed on the map view (map was moved manually), only display 3 is visible. It shows either the coordinates of the crosshair or other data on the crosshair position, e.g. a street name. The digital map must contain relevant data in order for this other data to be displayed. Select "Coordinates". The geo-coordinate display is switched on or off, depending on the previous status. A checkmark indicates which status is active. Exiting menu: Slide omp or press back button L in the center console ( page 86). Setting route type (USA only) Depending on your vehicle's production date the route type function may not be available. You can set the following route types: "Fast Route": COMAND calculates a route with the shortest possible (minimized) driving time. Exiting menu: Slide omp or press back button L in the center console ( page 86). Geo-coordinate display i If there is no crosshair on the map view, disIllustration: map with geo-coordinate display switched on 1 Current height above sea level 2 Number of GPS satellites from which signals for positioning can be received 3 Coordinate display plays 1, 2 and 3 are visible. Display 3 shows the coordinates of the current vehicle position. 170