2008 Mercedes S-Class Owner's Manual - Page 565
2008 Mercedes S-Class Manual
Page 565 highlights
Operation Tires and wheels i Reactivate the TPMS after adjusting the tire inflation pressure to the inflation pressure recommended for the vehicle operating condition. Tire inflation pressure should only be adjusted on cold tires. Observe the recommended tire inflation pressure on the Tire and Loading Information placard on the driver's door B-pillar ( page 553). Some vehicles may have supplemental tire inflation pressure information for driving at high speeds ( page 559) or for vehicle loads less than the maximum loaded vehicle condition. If such information is provided, it can be found on the inside of the fuel filler flap ( page 538). Press #. You will see the current inflation pressures for each tire or the message "Tire pressures displayed after driving a few minutes" appear in the multifunction display. Press %. The message "Use current pressure values as new reference values To confirm press "OK"" appears in the multifunction display. or Press #. The message "Tire pressure monitor restarted" appears in the multifunction display. After a few minutes driving, the current tire inflation pressure values are accepted as reference values and then monitored. If you wish to cancel activation: Press L. Press $ to exit menu screen. i After wheel rotation or sensor replacement, the vehicle must be parked for 20 minutes before attempting to reactivate the TPMS. i The menu overview can be found on ( page 266). Switch on the ignition ( page 344). Press ( or & to select the menu "Service". Press $ or % to select "Tire pressure". i When the wheel positions are changed on the vehicle, it is possible that the air pressure is temporarily displayed for the wrong position. This will be corrected after driving for several minutes, and the air pressure will be shown for the correct position. 564
![](/manual_guide/autos/2008-mercedes-sclass-owners-manual-35b413e/565.png)