2008 Mercedes S-Class Owner's Manual - Page 281

Control systems Instrument cluster control system Press % or $ to select the "Rearview camera" function. Press #. Service menu function display and are based on conditions or system status the vehicle's system has recorded. The vehicle status message memory menu only appears if there are any messages stored. Warning! i The menu overview can be found on ( page 266). The "Service" menu is used for calling up messages checking tire inflation pressure electronically with the Advanced TPMS* (standard on U.S. vehicles) Press # again if you would like to change the current status. The following settings are available: "On when in The Dynamic Rear View Reverse" Monitor automatically switches on when reverse gear is engaged. "OFF" The Dynamic Rear View Monitor is not switched on. activating Run Flat Indicator (Canada only) calling up the maintenance service indicator display check engine oil level* Calling up vehicle malfunction, warning and system status messages stored in memory Use the vehicle status message memory menu to scan malfunction and warning messages that may be stored in the system. Such messages appear in the multi- G Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems and do not replace the owner's and/or driver's responsibility to maintain the vehicle's operating safety by having all required maintenance and safety checks performed on the vehicle and by bringing the vehicle to an authorized Mercedes-Benz Center to address the malfunction and warning messages ( page 612). Press ( or & to select the "Service" menu. 280