2008 Mercedes S-Class Owner's Manual - Page 188

Control systems COMAND navigation system (entering a destination) List of house numbers with input characters When this list appears, the input characters 4 are automatically activated. i In the list of input characters 4, you can only select currently selectable characters. Which characters are included depends on the sequence in which you have entered your destination and the data version of the digital map. While the numbers are being selected as described below, the top list entry 3 always shows the house number which best corresponds to the input data as it has been entered up to that point. At the same time, COMAND automatically supplements numbers 1 entered by the user with appropriate numbers 2. Canceling an entry: Select "Back" in the bottom line and press n. or Press back button L in the center console ( page 86). As soon as COMAND can clearly attribute the numbers entered to a house number, the input characters 4 disappear. You see the list of house numbers without the input characters. Here you can confirm the current entry or make another selection. During number entry, you can also manually switch to the list of house numbers without input characters at any time. Switching manually to the list of house numbers without input characters: Slide qm. or Select ? in the second line from the bottom and press n. 1 Numbers entered by the user 2 Numbers automatically added by the system 3 Top list entry based on the input data up to that point 4 Input characters 5 Currently non-selectable numbers 6 Currently selected number 7 Currently selectable numbers 8 List of house numbers Selecting numbers: Slide omp or rotate ymz. Confirming number selection: Press n. Deleting individual numbers: Select ) in the bottom line and press n. Deleting an entire entry: Select ) in the bottom line and press n until the entire entry is deleted. 187