2008 Mercedes S-Class Owner's Manual - Page 682

Practical hints Replacing bulbs Installing Guide washer fluid reservoir into mounting so that the bottom retaining lug slides into the rubber sleeve on the longitudinal member. Turn retaining screw 1 clockwise. Bi-Xenon headlamps 1 Cover 1 2 Cover 2 3 Cover 3 Removing and installing washer fluid reservoir on left-hand side Vehicles with Airmatic* You must remove the washer fluid reservoir in order to change the bulbs of the front headlamp on the left-hand side. The washer fluid reservoir is on the front left-hand side of the engine compartment. Washer fluid reservoir (example illustration from S 550) Warning! G 1 Retaining screw Removing Turn retaining screw 1 counterclockwise. Take washer fluid reservoir out of mounting. Place washer fluid reservoir to the side and do not disconnect any wires or cables. Do not remove the cover for the Bi-Xenon headlamp. Because of high voltage in Xenon lamps, it is dangerous to replace the bulb or repair the lamp and its components. We recommend that you have such work done by a qualified technician. 681