2008 Mercedes S-Class Owner's Manual - Page 256

Control systems COMAND automatic climate control Selecting "AC OFF": Slide qmr or rotate ymz. Confirming selection: Press n. A checkmark appears when the cooling is switched off. Selecting "Mono" mode "Mono" is used to adjust the climate zones for the entire vehicle at the same time. When the "Mono" function is switched on and you change the climate on the driver's side, these changes will be carried out in the same manner for all climate zones. Select climate control settings tral climate control menu. Selecting "Mono": Slide qmr or rotate ymz. "AC OFF" appears in the central menu of the climate control settings. Confirming selection: Press n. A checkmark appears when the function has been selected. CenThe "Mono" function is automatically switched off when you: change an automatic climate control setting for the front passenger's side using COMAND operate a button from the automatic climate control for the front passenger's side operate one of the buttons for the rear climate control system Adjusting footwell temperature i In automatic mode, this setting optimizes the footwell temperature when outside temperatures are low. ! If the air conditioning cannot be turned on again, this indicates that the air conditioning is losing refrigerant. The compressor has turned itself off. Have the air conditioning checked at the nearest authorized Mercedes-Benz Center. The "Footwell Temperature" function is used to adjust the temperature difference between the footwell and the rest of the passenger compartment. Exiting menu: Press back button L in the center console ( page 86) or slide omp. The higher the selected value, the higher the temperature in the footwell will be. Select climate control settings tral climate control menu. Cen- 255