2011 Mercedes S-Class Owner's Manual - Page 164

162 Navigation list contains all the points of interest which cannot be assigned to any sub-category of the Restaurant main category and that lie within the search radius. Selecting a point of interest X Select the point of interest by turning cVd the COMAND controller and press W to confirm. The full address of the point of interest selected appears. Point of interest list Introduction The illustration below shows an example of the point of interest list for the RESTAURANT main category and BREWPUB sub-category in the vicinity of the current position. COMAND : Point of interest with address ; To start route calculation = To store an address in the destination memory ? To display details : Direction display from current position to A To make a call (when available) B To cancel selection C To show an address on the map X point of interest ; Linear distance to the point of interest = Point of interest ? Selected sub-category i Depending on the point of interest selected, COMAND uses different reference points in determining the linear distance to the destination: Rvicinity of current position: the linear distance is the distance of the point of interest from the current vehicle position. Rvicinity of destination: the linear distance is the distance of the point of interest from the destination entered. To start route calculation: select Start and press W to confirm. X To store an address in the destination memory: select Save and press W to confirm. You can now select storage options (Y page 177). X To show the detailed view: select Details and press W to confirm. X To make a call: select Call and press W to confirm (available if the point of interest entry contains a phone number and a telephone is connected to COMAND). COMAND switches to the telephone function (Y page 198). X To call up the map: select Map and press W to confirm. X You can scroll the map and select a destination (Y page 158).