2011 Mercedes S-Class Owner's Manual - Page 261

Vehicle If there is a risk of entrapment by the seat, you can also cancel the adjustment procedure by moving the seat adjustment switch. The steering column and driver's seat* stop moving immediately. Never leave children unsupervised in the vehicle. They could open the driver's door and thereby unintentionally activate the EASYENTRY feature and become trapped as a result. 259 ROff: the function is switched off. column: the steering wheel swings upwards. RSteering column and seat: the steering wheel swings upwards and the driver's seat moves backwards. RSteering Setting the interior/exterior lighting delayed switch-off time Interior lighting: you can set whether and for how long you wish the interior lighting to remain on in the dark after you have removed the key from the ignition lock. Exterior light: you can set whether and for how long you want the exterior lighting to remain on in the dark after the doors have been closed. The exterior lighting automatically switches off after the switch-off delay has elapsed. You may select from the following settings: R0 seconds: delayed switch-off is deactivated. R15, 30, 45, 60 seconds: delayed switch-off is activated. X To set the EASY-ENTRY/EXIT feature: select Vehicle in the main function bar by sliding XVY and turning cVd the i You can reactivate this function by opening a door within one minute. If none of the doors are opened after the key is removed from the ignition lock or if a door is not closed after it has been opened, the exterior lights switch off after 60 seconds. Z COMAND You can make a setting in COMAND so that the steering wheel swings upwards and/or the driver's seat moves backwards before you get into the vehicle. You can make the following settings: COMAND controller and press W to confirm. The main area is active. X Select the Easy-entry/exit feature menu by sliding XVY or turning cVd the COMAND controller. The EASY-ENTRY/EXIT feature menu appears. The current setting is indicated by a # dot. X Select Setting by sliding ZVÆ or turning cVd the COMAND controller. The selected setting is indicated by a # dot.