2011 Mercedes S-Class Owner's Manual - Page 65
2011 Mercedes S-Class Manual
Page 65 highlights
Children in the vehicle Removing a child restraint system/ deactivating the special seat belt retractor: X 63 Always comply with the manufacturer's installation instructions. X Press the seat belt release button and guide the belt tongue to the belt outlet. The special seat belt retractor function is deactivated. G Warning ISOFIX is a standardized securing system for specially designed child restraint systems on the rear seats. Securing rings for two LATCHtype (ISOFIX) child restraint systems are installed on the left and right of the rear seats. Use the vehicle's seat belts to install child restraint systems without the ISOFIX securing system. Follow the manufacturer's instructions for of child restraint systems. Never release the seat belt buckle while the vehicle is in motion, since the special seat belt retractor will be deactivated. LATCH-type child restraint (ISOFIX) in the rear G Warning Observe "Important safety notes" (Y page 60). ! Vehicles with a center seat in the rear: when installing the LATCH-type (ISOFIX) child restraint system, make sure that the seat belt for the center seat does not get trapped. Otherwise, the seat belt could be damaged. G Warning Children that are too large for a child restraint must travel in seats using normal seat belts. Position shoulder belt across the chest and shoulder, not face or neck. In order to attain the correct seating position for children weighing over 41 lb (18 kg), it may be necessary to use a booster seat until they reach a height where a normal lap/shoulder seat belt lies properly across their bodies without the need for a booster seat. Install the child restraint system according to the manufacturer's instructions. The child restraint system must be installed firmly on both brackets. An incorrectly installed child restraint system can come loose in the event of an accident, causing the child to be severely or fatally injured. Child restraint systems/child restraint retaining brackets that are damaged or have suffered damage due to an impact must be replaced. Installation instruction : indicates the installation point of securing ring 2. X Move the rear seat backrest of the electrically adjustable rear seat to the upright position (Y page 102). X Fold upholstered lining = and the Velcro fastener upwards. X Turn installation aid ? to a vertical position, so that upholstered lining = does not fold back down. X Install the LATCH-type (ISOFIX) child restraint system on both securing rings ;. Comply with the manufacturer's instructions when installing the LATCHtype (ISOFIX) child restraint system. G Warning! Vehicles with rear power seats: Z Safety
![](/manual_guide/autos/2011-mercedes-sclass-owners-manual-2e07492/65.png)