2011 Mercedes S-Class Owner's Manual - Page 280
2011 Mercedes S-Class Manual
Page 280 highlights
278 Changing bulbs Switch the reading lamp off = Interior lighting Changing bulbs Important safety notes Xenon bulbs If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the engine. For this to be observed, the lights must be switched on before starting the engine. Interior lighting control Important notes In order to prevent the vehicle's battery from discharging, the interior lighting functions are automatically deactivated after some time except for when the key is in position 2 in the ignition lock. Automatic interior lighting control G Warning Lights and windshield wipers X To switch on/off: press the | button. The OFF indicator lamp shows whether the automatic interior lighting control is deactivated (indicator lamp on) or activated (indicator lamp off). The interior lighting automatically switches on if you: Runlock Ropen the vehicle a door Rremove the key from the ignition lock The interior light is activated for a short while when the key is removed from the ignition lock. You can activate this delayed switch-off using COMAND (Y page 259). Xenon bulbs carry a high voltage. You could get an electric shock and be seriously or even fatally injured if you touch the electric contacts on Xenon bulbs. Therefore, never remove the cover from Xenon bulbs. Do not change Xenon bulbs yourself, but have them replaced at a qualified specialist workshop which has the necessary specialist knowledge and tools to carry out the work required. Mercedes-Benz recommends that you use an authorized Mercedes-Benz Center for this purpose. In particular, work relevant to safety or on safety-related systems must be carried out at a qualified specialist workshop. Manual interior lighting control X To switch the front interior lighting on/ off: press the c button. X To switch the rear interior lighting on/ off: press the u button. X To switch the reading lamps on/off: press the p button. Bulbs and lamps are an important aspect of vehicle safety. You must therefore make sure that these function correctly at all times. Have the headlamp setting checked regularly. Other bulbs G Warning! Bulbs and lamps can be very hot. You should therefore allow them to cool down before you change them. Otherwise, you could be burned if you touch them. Keep bulbs out of the reach of children. Otherwise, they could damage the bulbs, for example, and injure themselves.