2010 Mercury Milan Owner's Manual - Page 212
2010 Mercury Milan Manual
Page 212 highlights
Driving L (Low) This position: • Provides increased engine braking during downhill/mountain driving. • Provides extended shift scheduling, allowing both upshifts and downshifts, at a higher overall RPM to provide optimum engine braking. • Is not intended for use under extended or normal driving conditions and results in lower fuel economy. Understanding the gearshift positions of the 6-speed automatic transmission equipped with a 3.0L V6 Duratec engine (if equipped) Your vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating. When you take your foot off the accelerator pedal and the vehicle begins to slow down the torque converter clutch locks up and aggressively shuts off fuel flow to the engine while decelerating. This fuel economy benefit may be perceived as a light to medium braking sensation when removing your foot from the accelerator pedal. P (Park) This position locks the transmission and prevents the front wheels from turning. To put your vehicle in gear: • Press the brake pedal • Move the gearshift lever into the desired gear To put your vehicle in P (Park): • Come to a complete stop • Move the gearshift lever and securely latch it in P (Park) WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Switch the ignition off and remove the key whenever you leave your vehicle. 212