2010 Mercury Milan Owner's Manual - Page 36

Entertainment Systems Sound Adjustments Press SOUND repeatedly to cycle through the following features: BASS: Press TREBLE: Press SEEK/TRACK SEEK/TRACK to adjust the level of bass. to adjust the level of treble. to adjust the audio between SEEK/TRACK BALANCE: Press the left (L) and right (R) speakers. SEEK/TRACK to adjust the audio between the FADE: Press back (B) and front (F) speakers. SPEED COMPENSATED VOLUME: With this feature on, radio volume automatically gets louder with increasing vehicle speed to compensate for road and wind noise. The default setting is off. SEEK/TRACK to adjust between SPEED OFF and levels Use 1-7: Increasing the level from 1 (lowest setting) to 7 (highest setting) allows the radio volume to automatically change slightly with vehicle speed to compensate for road and wind noise. Recommended level is 1-3; SPEED OFF turns the feature off and level 7 is the maximum setting. ALL SEATS (Occupancy mode, if equipped): Press SOUND repeatedly to reach the Occupancy mode setting. Press SEEK/TRACK to select and optimize sound for ALL SEATS, DRIVERS SEAT or REAR SEATS. Extra Features AUX: Press repeatedly to cycle through LINE IN (auxiliary audio mode), and SYNC (if equipped). For location and further information on auxiliary audio mode, refer to Auxiliary input jack later in this chapter. If your vehicle is equipped with SYNC , please refer to the SYNC information included with your vehicle for further information. OK: Your vehicle may be equipped with special phone and media features which will require you to confirm commands by pressing OK. For further information, refer to the SYNC information included with your vehicle for further information. 36