2010 Mercury Milan Owner's Manual - Page 23

Instrument Cluster 3. Once "OIL LIFE SET TO XXX%" is displayed, release and press RESET switch to change the Oil Life Start Value. Each release and press will reduce the value by 10%. Note: Oil life start value of 100% equals 7,500 miles (12,000 km) or 12 months. For example, setting oil life start value to 60% sets the oil life start value to 4,500 miles (7,200 km) and 219 days. Units (English/Metric) 1. Select this function from the SETUP menu for the current units to be displayed. 2. Press RESET to change from English to Metric. Autolamp delay (if equipped) This feature keeps your headlights on for up to three minutes after the ignition is switched off. 1. To disable/enable the autolamp delay feature, select this function from the SETUP menu for the current display mode. 2. Press RESET to select the new autolamp delay values of 0, 10, 20, 30, 60, 90, 120 or 180 seconds. Autolock This feature automatically locks all vehicle doors when the vehicle is shifted into any gear, putting the vehicle in motion. 1. To disable/enable the autolock feature, select this function from the SETUP menu for the current display mode. 2. Press the RESET button to turn autolock on or off. 23