2010 Mercury Milan Owner's Manual - Page 316
2010 Mercury Milan Manual
Page 316 highlights
316 Capacity 12 ounces (0.35L) ZC-32-A / WSB-M8B16-A2 XY-75W140-QL / WSL-M2C192-A Ford part name Ford part number / Ford specification Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant Motorcraft Premium Windshield Washer Concentrate Item Power transfer unit (PTU) fluid (AWD)5 Windshield washer fluid 4.75 quarts (4.5L) Maintenance and Specifications 17.5 gallons - - (66.2L) 16.5 gallons - - Fuel tank (AWD) (62.4L) 1 Add the coolant type originally equipped in your vehicle. 2 Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. 3 Service refill capacity is determined by filling the transmission within 3/8 inch (10mm) of the bottom of the filler hole with the vehicle on a level surface. 4 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 5 The power transfer unit is lubricated for life with synthetic lube. Lubricant levels are not to be checked or changed unless a leak is suspected or repair required. Replace power transfer unit lubricant with specified synthetic lubricant anytime the unit is submerged in water. See your authorized dealer for fluid level checking or filling of the power transfer unit. 6 Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to scheduled maintenance information to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. Fuel tank (FWD)