2001 Nissan Altima Owner's Manual - Page 141

The automatic transmission in your vehicle is electronically controlled by the transmission control module to produce maximum power and smooth operation. The recommended operating procedures for this transmission are shown on the following pages. Follow these procedures for maximum vehicle performance and driving enjoyment. positions if the ignition key is turned to LOCK or if the key is removed. The shift selector lever can be moved if the ignition switch is in the ACC position. This allows the vehicle to be moved if the battery is discharged. Starting the vehicle ● After starting the engine, fully depress the foot brake pedal before shifting the shift selector lever to the D (Drive), R (Reverse), 2 or 1 position. Be sure the vehicle is fully stopped before attempting to shift the shift selector lever. ● Keep the foot brake pedal depressed and shift into a driving gear. ● Release the foot brake, then gradually start the vehicle in motion. The automatic transmission is designed so the foot brake pedal MUST be depressed before shifting from P (Park) to any drive position while the ignition switch is ON. The selector lever cannot be moved out of P (Park) and into any of the other gear 5-8 Starting and driving