2009 Nissan Quest Owner's Manual - Page 190

NOTE: If you change the horn beep or the lamp flash feature with the keyfob, the mode will not be changed with the display. Use the keyfob to return to the previous mode and re-enable the display control. Auto Re-Lock Time: Select to set the length of time before doors automatically re-lock. Sensitivity of Automatic Headlights: Select to change the sensitivity setting of the automatic headlights: LHA0564 LHA0565 Adjust Driver Seat When Exiting Vehicle: Select so the driver's seat automatically moves back and returns to the original position for ease of exit and entry. Remote Unlock Driver's Door First: Select to change which doors will unlock first during an unlocking operation: Only the driver's door ←→ All the doors Keyless Remote Response - Horn: Select to turn on or turn off the horn chirp mode used when the LOCK button on the keyfob is pressed. NOTE: If you change the horn beep or the lamp flash feature with the keyfob, the display screen will not show the current mode. Use the keyfob to return to the previous mode and re-enable the display screen control. Keyless Remote Response - Lights: Select to turn on or turn off the hazard indicator flash mode used when the LOCK or UNLOCK button on the keyfob is pressed. ● Lower: less sensitive, automatic headlights will take longer to come on when the headlight sensor senses less ambient light. ● Higher: more sensitive, automatic headlights will come on quicker when the headlight sensor senses less ambient light. Automatic Headlights Off Delay: Select to change the setting for the length of time the automatic headlights remain on after exiting the vehicle. Speed Dependent Wiper: Select to turn on or turn off the driving speed dependent intermittent wiper function. Return All Settings to Default: Select to change all VEHICLE ELECTRONICS SYSTEMS to their default settings. 4-26 Display screen, heater, air conditioner, audio and phone systems