2009 Nissan Quest Owner's Manual - Page 50

3. Tighten the tether strap according to the manufacturer's instructions to remove any slack. For best child restraint fit, see the child restraint installation instructions in this section and the child restraint manufacturer's instructions. CHILD RESTRAINT INSTALLATION USING LATCH-2ND ROW CAPTAIN'S CHAIRS (if so equipped) WARNING WRS0688 ● Inspect the lower anchors by inserting your fingers into the lower anchor area and feeling to make sure there are no obstructions over the LATCH anchors, such as seat belt webbing or seat cushion material. The child restraint will not be secured properly if the LATCH anchors are obstructed. Front-facing Follow these steps to install a front-facing child restraint in the 2nd row captain's chairs using LATCH: 1. Recline the seatback if the seatback is adjustable to assist in attaching the child restraint to the lower anchors. 2. Position the child restraint on the seat. Always follow the child restraint manufacturer's instructions. Type B The center position of the 3rd row bench seat is the seating position that can use a top tether strap. For the 3rd row bench seat (if so equipped), install the top tether strap as follows: 1. Position the top tether strap under the head restraint (Type A) or position the top tether strap around the side of the head restraint (Type B). 2. Secure the tether strap to the tether anchor point on the seat directly behind the child restraint. ● Attach LATCH system compatible child restraints only at the locations shown. For the LATCH lower anchor locations see "LATCH (Latch Anchors and Tethers for CHildren) system". If a child restraint is not secured properly, your child could be seriously injured or killed in an accident. ● The LATCH anchors are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts or harnesses. 1-34 Safety-Seats, seat belts and supplemental restraint system