2011 Nissan Versa Owner's Manual - Page 234

3. Remove the shift lock release cover as shown. 4. Insert a small screwdriver in the shift lock release slot and push down. 5. Move the shift selector to the N (Neutral) position while holding down the shift lock release. 6. Now the vehicle may be moved to the desired location. If the shift selector cannot be moved out of P (Park), have a NISSAN dealer check the automatic transmission system as soon as possible. WSD0195 SSD0533 Shift lock release If the battery is discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed. To move the shift selector, release the shift lock. The shift selector can be moved to N (Neutral). To push the shift lock release, complete the following procedure: 1. Place the ignition switch in the LOCK position and remove the key. 2. Apply the parking brake. WARNING If the shift selector cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunctioning stop lights could cause an accident injuring yourself and others. Overdrive switch Each time your vehicle is started, the transmission is automatically "reset" to overdrive ON. ON: Accelerator downshift - in D position - For passing or hill climbing, depress the accelerator pedal to the floor. This shifts the transmission down into a lower gear, depending on the vehicle speed. With the engine running and the shift selector in the D (Drive) position, the transmission upshifts into Overdrive as vehicle speed increases. Overdrive does not engage until the engine has reached operating temperature. Starting and driving 5-17