2011 Nissan Versa Owner's Manual - Page 238

3. Remove the shift lock release cover as shown. 4. Insert a small screwdriver in the shift lock release slot and push downward. 5. Move the shift selector to the N (Neutral) position while holding down the shift lock release. 6. Now the vehicle may be moved to the desired location. If the shift selector cannot be moved out of P (Park), have a NISSAN dealer check the CVT system as soon as possible. WSD0195 WSD0164 Shift lock release If the battery is discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed. To move the shift selector, release the shift lock. The shift selector can be moved to N (Neutral). To push the shift lock release, complete the following procedure: 1. Place the ignition switch in the LOCK position and remove the key. 2. Apply the parking brake. WARNING If the shift selector cannot be moved from the P (Park) position while the engine is running and the brake pedal is depressed, the stop lights may not work. Malfunctioning stop lights could cause an accident injuring yourself and others. Overdrive (O/D) OFF switch When the O/D OFF switch is pushed with the shift selector in the D (Drive) position, the light in the instrument panel illuminates. See "Overdrive off indicator light (CVT models)" in the "Instruments and controls" section of this manual. Use the Overdrive off mode when you need improved engine braking. To turn off the Overdrive off mode, push the O/D indicator light will OFF switch again. The turn off. Each time the engine is started, or when the shift selector is shifted to any position other than D Starting and driving 5-21