2015 Nissan Pathfinder Owner's Manual - Page 182

A can only be ● The switch on the liftgate ᭺ used to open the liftgate if the MAIN switch (located in the Instrument panel) is in the ON position. A is activated ● If the liftgate opener switch ᭺ while the cinching motor is engaged, the cinching motor will disengage and release the latch. A warning chime will sound if the shift lever is moved out of P (Park) during a power open operation. ● The key fob button must be held for 0.5 seconds before the liftgate closes. B can only be ● The switch on the liftgate ᭺ used to close the liftgate if the power liftgate main switch is in the ON position. LPD2275 Power Close: The power liftgate automatically moves from the fully open position to the secondary position. When the liftgate reaches the secondary position, the cinching motor engages and pulls the liftgate to its primary latch position. Power close takes approximately 7 - 10 seconds. The power close feature can be activated by the switch on the key fob, the instrument panel and the liftgate B . The hazard lights flash and a chime switch ᭺ sounds to indicate the power close sequence has been started. Reverse: The power liftgate will reverse direction immediately during power open or power close if the key B is fob, instrument panel or liftgate switch ᭺ pushed. A chime will sound to announce the reversal. Auto Reverse: If an obstacle is detected during power open or power close, a warning chime will sound and the liftgate will reverse direction and return to the full open or full close position. If a second obstacle is detected, the liftgate motion will stop and the liftgate will enter manual mode. A pinch strip is mounted on each side of the liftgate. If an obstacle is detected by a pinch strip during power close, the liftgate will reverse direction and return to the full open position. Pre-driving checks and adjustments 3-25