2015 Nissan Pathfinder Owner's Manual - Page 389

2. Select "Driver Aids", and press the ENTER button. 3. To set the BSW/RCTA system to on or off, use the buttons to navigate in the menu and use the ENTER button to select or change an item. ● Select "Blind Spot" and press the ENTER button. - To turn on the warning, use the ENTER button to check box for "BSW/RCTA" RCTA temporarily not available LSD2044 LSD2208 Illustration 2 ● The sonar system chime indicating there is a object behind the vehicle has a higher priority than the RCTA chime (single beep) indicating an approaching vehicle. If the RCTA system detects an object behind the vehicle and an approaching vehicle at the same time the following indications are provided: - The sonar system chime sounds - The Blind Spot Warning indicator light on the side of the approaching vehicle flashes RCTA SYSTEM OPERATION The BSW/RCTA system can be turned off temporarily by pushing the Blind Spot Warning and 1 . The Rear Cross Traffic Alert switch ᭺ BSW/RCTA system automatically turns on every time the engine is started. The RCTA system can be turned off permanently by setting in the vehicle information display. button until "Settings" dis1. Press the plays in the vehicle information display. Use button to select "Driver Assisthe tance". Then press the ENTER button. When radar blockage is detected, the system will be deactivated automatically. The "Side Radar Obstruction" warning message will appear and the Blind Spot indicator (white) will blink in the vehicle information display. The Blind Spot Warning and Rear Cross Traffic Alert switch indicators will also blink. The systems are not available until the conditions no longer exist. The radar sensors may be blocked by temporary ambient conditions such as splashing water, mist or fog. The blocked condition may also be caused by objects such as ice, frost or dirt obstructing the radar sensors. 5-30 Starting and driving