2015 Nissan Pathfinder Owner's Manual - Page 380

3. To set the BSW/RCTA system to on or off, buttons to navigate in the use the menu and use the ENTER button to select or change an item: ● Select "Blind Spot" and press the ENTER button. - To turn on the warning, use the ENTER button to check box for "BSW/RCTA system" LSD2208 LSD2247 When the BSW and RCTA switch is turned off, 1 on the switch is off. The indicator the indicator ᭺ will also be off if the BSW/RCTA is deactivated. Temporarily not available When radar blockage is detected, the system will be deactivated automatically. The "Side Radar Obstruction" warning message will appear and the Blind spot indicator (in the meter display) will A in the vehicle information display. The blink ᭺ Blind Spot Warning and Rear Cross Traffic Alert switch indicator will also blink. The systems are not available until the conditions no longer exist. The radar sensors may be blocked by temporary ambient conditions such as splashing water, mist How to enable/disable the BSW system Perform the following steps to enable or disable the BSW system. button until "Settings" dis1. Press the plays in the vehicle information display. Use button to select "Driver Assisthe tance". Then press the ENTER button. 2. Select "Driver Aids", and press the ENTER button. Starting and driving 5-21