2015 Nissan Pathfinder Owner's Manual - Page 238

AUTOMATIC OPERATION Cooling and/or dehumidified heating (AUTO) This mode may be used all year round as the system automatically works to keep a constant temperature. Air flow distribution and fan speed are also controlled automatically. 1. Press the AUTO button on. (The indicator on the button will illuminate and AUTO will be displayed.) 2. Operate the driver's side temperature control buttons. ● Adjust the temperature display to about 75°F (24°C) for normal operation. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. 3. You can individually set driver's and front passenger's side temperature using each temperature control button. When the DUAL button or passenger's side temperature button is pressed, the DUAL indicator will come on. To turn off the passenger's side temperature control, press the DUAL button. Heating (A/C OFF) The air conditioner does not activate. When you need to heat only, use this mode. 1. Press the A/C button. (A/C OFF will be displayed and A/C indicator will turn off.) 2. Operate the temperature control buttons to set the desired temperature. ● The temperature of the passenger compartment will be maintained automatically. Air flow distribution and fan speed are also controlled automatically. ● Do not set the temperature lower than the outside air temperature. Otherwise the system may not work properly. ● Not recommended if windows fog up. ● To quickly remove ice from the outside of the windows, use the fan speed control dial to set the fan speed to maximum. ● As soon as possible after the windshield is clean, press the AUTO button to return to the automatic mode. front defroster button is ● When the pressed, the air conditioner will automatically be turned on at outside temperatures above 36°F (2°C). The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance. Remote start logic Vehicles equipped with automatic climate controls and remote start function may go into automatic heating or cooling mode when remote start is activated depending on outside and cabin temperatures. During this period, the climate control display and buttons will be inoperable until ignition switch is turned on. Dehumidified defrosting or defogging 1. Press the front defroster button on. (The indicator light on the button will come on.) 2. Operate the temperature control buttons to set the desired temperature. Monitor, climate, audio, phone and voice recognition systems 4-41