2006 Polaris Sawtooth Owners Manual - Page 85
2006 Polaris Sawtooth Manual
Page 85 highlights
MAINTENANCE AND LUBRICATION Battery WARNING Improperly connecting or disconnecting battery cables can result in an explosion and cause serious injury or death. When removing the battery, always disconnect the negative (black) cable first. When reinstalling the battery, always connect the negative (black) cable last. Battery Removal 1. Remove the seat. 2. Disconnect the battery hold-down strap. 3. Disconnect the black (negative) battery cable first. 4. Disconnect the red (positive) battery cable next. 5. Lift the battery out of the battery compartment. Battery Installation When installing a new battery, make sure it's fully charged prior to its initial use. Using a new battery that has not been fully charged can damage the battery and result in a shorter life. It can also hinder vehicle performance. Follow the battery charging instructions on page 83 before installing the battery. 1. Ensure that the battery is fully charged. 2. Set the battery in the battery holder. 3. Connect and tighten the red (positive) cable first. 4. Connect and tighten the black (negative) cable last. 5. Attach the hold-down strap. 6. Verify that cables are properly routed. 7. Reinstall the seat. 82