1994 Pontiac Trans Sport Owner's Manual - Page 12

Folding the Seatback To fold down the seatback, lift the seatback latch release while foldingthe seatback forward. Removing the Bench Seat Replacing the Bench Seat 1. Make sure the seatback is in the upright position, and that all safety belts are on the seat. Don't put the bench seat inso it faces backward, because it won't latch that way. If you want more storage room behind the seat, use the floor pins closer to the front of the vehicle. See "Adjusting Rear Seats" later in this section. 1. Place the front hooks of the bench seat latch onto the front floor pins. To raise the seatback, lift the seatback 2. Then lift the seatback latch release latch release while raising the seatback while folding the seatback forward. until it locks upright. Push and pullon the 3. From behind the bench seat, pull up seatback to check that it is locked. the two rear levers, and lift the bench seat. 4. Remove the bench seat from the vehicle. II ...