1994 Pontiac Trans Sport Owner's Manual - Page 58

To lock the liftgate, use the power door lock switch, the optional remote keyless entry transmitter, or lock it manually by turning the lock counterclockwise. Overriding Lock Delay To override the lock delay feature, press the front of the power door locks switch (the unlock position) while the shift lever is in "P" (Park). 0 Automatic Door Locks (OPTION) If you have the Remote Keyless Entry System, there are three additional ways With this feature you can unlock all the you can disable the lock delay feature: of doors from the outside holding the key by Press the unlock symbol on your in the unlock position for one second. To remote transmitter, unlock only the driver's or passenger's door, turn the keyto the unlock position 0 Return the shift lever to "P" (Park), or and release. 0 Turntheignitionoff. From the inside, when the ignition is on Customizing Your Automatic Door and the driver's dooris closed, all doors Locks Feature will lock each time you move the shift lever out of "P" (Park), or manually lock 1he.doors using the power lock switches With the Remote Keyless Entry System you can customize your automatic door they will lock when closed. locks feature to suit your individual If the sliding dooris open when you move needs. (See "Remote Keyless Entry" later .in this section.) the shift lever out of (Park), a lock "P" delay feature allows the sliding door to With the doors closed and the ignition on, lock five seconds after it is closed. press and hold the driver's power door lock switch in the lock position for ten With the automatic door locks feature, seconds. The doors will lock, then unlock, you can still lock or unlock the doors at indicating that you have ten seconds in any time, either manually orwith the which to program one of four custom power door lock switches. modes. To program the automatic door locks system to unlock only the driver's door when the shift lever is returned to "I?" (Park), press the unlock symbol on your remote transmitter once. The driver's door will unlock, indicating that this mode has been successfully programmed. To program the automatic door locks system to unlock all doors when the shift lever is returned to "P" (Park), press the unlock symbol on your remote transmitter once (the driver's door will unlock), then press the unlock symbol again. All doors will unlock, indicating that this mode has been successfully programmed. 0 To program the automatic door locks system to leave all doors locked when the shift lever is returned to "P" (Park), press the lock symbol on your remote transmitter once. All doors will lock, indicating that this mode has been successfully programmed. s/...