1994 Pontiac Trans Sport Owner's Manual - Page 17
1994 Pontiac Trans Sport Manual
Page 17 highlights
Seats & Restraint Systems I Replacing Rear Bucket Seats Follow the diagram on the back of the seats to replace the seats in their proper location. The "LEFT ONLY" seats fit only in the left positions. The "RIGHT ONLY" seats fit only in the right positions. The "CENTER OR LEFT" seat fits in the center position and in either left position. To install third row seats, if your vehicle is equipped with them, the second row seats must be tilted forward or removed. Don't try to place the seats in backward, because they won't latch that way. 1. With the entire seat tilted forward, place the front hooks of the seat latch onto the front floor pins. 2. Firmly press the rear hooks onto the rear floor pins. The seat should lock into position. 3. Lift the upper lever and pull up on the seatback until it locks upright. 4. Push and pull on the seat to check that it is locked. 5. Check to see that you have put the seats into the proper location, according to the label on each seat. If not, the seats may not latch properly, and your passengers may not have the proper safety belt. Dump And Stow Feature . . 16