2003 Pontiac Grand Am Owner's Manual - Page 273

2003 Pontiac Grand Am Manual

Page 273 highlights

Front Turn Signal and Parking Lamps 1. Remove the headlamp assembly. Refer to the removal procedure earlier in this section. 2. Turn the bulb assembly retainer and pull out the bulb. 3. Unclip the bulb assembly from the wiring harness. 4. When replacing the bulb, be sure to properly align the bulb with the locating feature in the assembly. 5. Reverse Steps 1 through 3 to reinstall the bulb assembly. 2. Lift the headlamp assembly forward, out of the mounting bracket. 3. Turn the bulb assembly retainer counterclockwise one-sixth of a turn and pull out the bulb assembly. 4. Unclip the bulb assembly from the wiring harness. 5. After replacing the bulb, reverse Steps 1 through 4 to reinstall the bulb assembly and headlamp assembly. Center High-Mounted Stoplamp (CHMSL) 1, Open the trunk lid and locate the center high-mounted stoplamp on the inside of the lid. 2, Remove the three screws. 3. Gently remove and replace the bulb(s). 4 Reverse Steps 1 and 2 to reassemble the lamp assembly. 5-50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354

2.
3.
4.
5.
Lift the headlamp
assembly forward, out of the
mounting bracket.
Turn the bulb assembly retainer counterclockwise
one-sixth of a turn and pull out the bulb assembly.
Unclip the bulb assembly from the wiring harness.
After replacing the bulb, reverse Steps
1
through
4
to
reinstall the bulb assembly and headlamp
assembly.
Front Turn Signal
and
Parking
Lamps
1.
Remove the headlamp
assembly.
Refer
to
the
removal
procedure earlier in this section.
2.
Turn the bulb assembly retainer and
pull
out
the bulb.
3.
Unclip the bulb assembly from the wiring harness.
4.
When replacing the bulb, be
sure
to
properly
align the bulb with the locating feature in the
assembly.
5.
Reverse
Steps
1
through
3
to
reinstall the bulb
assembly.
Center
High-Mounted
Stoplamp
(CHMSL)
1,
2,
3.
4
Open the trunk lid and locate the
center
high-mounted
stoplamp
on
the
inside of the
lid.
Remove the three screws.
Gently remove and replace
the bulb(s).
Reverse
Steps
1
and
2
to reassemble
the
lamp
assembly.
5-50