2008 Pontiac G8 Owner's Manual - Page 249

Vehicle Service and Care Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire Follow these directions closely for correct sealant usage. Do a safety check before proceeding. See If a Tire Goes Flat on page 9-62. Inspect the damaged tire. The sealant cannot seal sidewall damage, large punctures, or a tire that has unseated from the wheel. See Roadside Assistance Program on page 12-6. Do not remove any objects that have penetrated the tire. 1. Place the tire sealant and compressor kit on the ground and unwrap the sealant/air hose (E) from the side of the compressor. 2. Remove the air compressor accessory plug (B) from the unit. Do not plug the plug in yet. 3. Turn the tire valve stem cap counterclockwise to remove. 4. Attach the sealant/air hose (E) onto the tire valve stem. Turn it clockwise until tight. 9-65 5. Make sure the sealant and compressor kit on/off switch (A) is in the O (off) position. Plug the air compressor accessory plug (B) into an accessory power outlet in the vehicle. See Accessory Power Outlet(s) on page 4-9 for more information. Do not slam door or close window on the compressor accessory plug cord. { CAUTION Idling the engine in a closed-in place or with the climate control system off can cause deadly carbon monoxide (CO). See Engine Exhaust on page 8-12. 6. Start the vehicle. The vehicle must be running while using the air compressor. A. B. C. D. E. F. G. On/Off Switch Air Compressor Accessory Plug Air Compressor Sealant Canister Sealant/Air Hose Air-only Hose Pressure Gage