2008 Pontiac G8 Owner's Manual - Page 67
2008 Pontiac G8 Manual
Page 67 highlights
Keys, Doors and Windows 3. Insert and turn the new section (A) to ON/RUN within five seconds of removing the original key. 4. Turn the new section (A) to LOCK/OFF. Section (A) is now programmed. To program a new section (B): 1. Turn the ignition to ON/RUN with the new section (A). The vehicle must be in PARK (P). 2. Select Remote Key from the personalization menu. 3. Select Program. 4. Press Q and W on the new section (B), at the same time, until you hear two beeps. 5. Repeat Step 4 for all other keys, including keys that require programming or ones previously programmed to the vehicle. Any key not reprogrammed will be erased. 6. Turn the ignition to LOCK/OFF. 7. Join sections (A) and (B) until they click. Do not join the two key sections until programming is complete. Do not leave the key or device that disarms or deactivates the theft deterrent system in the vehicle. 2-13 Press V on the RKE transmitter to open the trunk without setting off the alarm. The system will rearm when the trunk is closed. Disarming the System To disarm the system, do one of the following: Content Theft-Deterrent Your vehicle has a content theft-deterrent alarm system. • Press K on the RKE transmitter. • Turn the ignition to ON/RUN. • Allow the alarm to time out after about 30 seconds and reset itself. The alarm will automatically disarm. If the system is armed and any door is unlocked without pressing on the RKE transmitter the alarm will sound. Arming the System To arm the system, either: • Press Q on the RKE transmitter. • Or, lock the vehicle using the key in the driver's door. The alarm will automatically arm after about 30 seconds. The security light, located on the instrument panel, will flash. K
![](/manual_guide/autos/2008-pontiac-g8-owners-manual-f659800/67.png)