2011 Subaru Impreza Owner's Manual - Page 127

3-6 Instruments and controls Meters and gauges NOTE Liquid-crystal displays are used in some of the meters and gauges on the combination meter. You will find their indications hard to see if you wear polarized glasses. trip meter back light illuminate. 2. Meter needles and gauge needles each show MAX position. 3. Meter needles and gauge needles each show MIN position. 4. Regular illumination (for driving) begins. "Acc" position. " Press the trip knob to show " " or " on the odometer and trip meter display. The display can be switched as shown in the following illustration by pressing the trip knob. & Combination meter illumination When the ignition switch is turned to the "ON" position, the various parts of the combination meter are illuminated in the following sequence: Turbo models: 1. Warning lights, indicator lights, meter needles and gauge needles illuminate. 2. Meter needles and gauge needles each show MAX position. 3. Meter needles and gauge needles each show MIN position. 4. Meter and gauge dials, odometer and trip meter back light illuminate. 5. Regular illumination (for driving) begins. Non-turbo models: 1. Warning lights, indicator lights, meter needles, gauge needles, odometer and & Canceling the function for meter/gauge needle movement upon turning on the ignition switch It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the "ON" position. Turn the ignition switch to the "LOCK" or *1: STI only ", and " " or " " *2: " " or " cannot be displayed when the ignition switch is in the "ON" position. *3: Turbo models except STI To change the current setting, press the trip knob for at least 2 seconds. : Activated : Deactivated