2011 Subaru Impreza Owner's Manual - Page 308

Starting and operating 7-45 & To temporarily cancel the cruise control The cruise control can be temporarily canceled in the following ways. & To change the cruising speed ! To increase the speed (by button) . Push the "CANCEL" button. . Depress the brake pedal. . Depress the clutch pedal (MT models only). . Shift the select lever into the "N" position (AT models only). . Shift the shift lever into the neutral position (MT models only). The cruise control set indicator light on the combination meter turns off when the cruise control is canceled. To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the "RES/ACC" button to return to the original cruising speed automatically. The cruise control set indicator light on the combination meter will automatically illuminate at this time. Push the "RES/ACC" button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be memorized and treated as the new set speed. When the difference between the actual vehicle speed and the set speed is less than 4 mph (6.8 km/h), the set speed can be increased 1 mph (1.6 km/h) each time by pressing the "RES/ACC" button quickly. & To turn off the cruise control There are two ways to turn off the cruise control: . Push the "CRUISE" main switch button again. . Turn the ignition switch to the "Acc" or "LOCK" position (but only when the vehicle is completely stopped). - CONTINUED -